V 1000.1 2_Square
V 1000.1 1_SquareV Series Amp

V 1000.1 – Mono

Don’t be fooled by their cosmopolitan looks. The Digital Block Series Amplifiers provide Massive amounts of Power in a stylish and surprisingly small heat sink.

These CEA 2006 Certified amplifiers boast advanced Digital Power Supply Switching, Bridgeable RCA Connections, Matched MOSFET “N” Drive outputs with an advanced Six Way Protection. Other features include: Nickel Plated Connectors / 24 dB Low Pass Crossovers with an adjustable range of 40Hz – 220Hz / Adjustable Low Pass 18dB Sub Harmonic Filter with a range of 10Hz – 50Hz. All of these features are mounted in a beautiful brushed aluminum “finless” heat sink with a ¼” milled top plate bolted down with “hex bolts”.

The four cornered hex bolts unscrew to reveal mounting tubes (see attached pictures) that allows the installer to bolt down the amp for a razor clean installation. Top it off with a soft blue center logo glow with hundreds of “micro” LEDs. The New 2010 Massive Audio “D” Block Series combines “Style, Form, Function and Performance”

Product ManualLocate A Dealer
Category: , . Tags: , , , .

Product Description

Everyone knows that in the state of California you: Can’t have your front windows tinted and Can’t drive and talk while holding a cell phone in your hand. One thing you can do in any state-of-mind you’re in: is to roll up the windows, put down the hands free, change lanes and bump that ride with three NEW “Volt” Series Power Amplifiers from Massive Audio.

All three full range Class A/B, CEA 2006 Certified amplifiers, V500.2, V1000.4 and the V1000.1 boast advanced Digital Switching Power Supplies with Nickel Plated RCA Connectors, Speaker Level Inputs, Advanced Operation Protection, Switchable 18 dB HP/LP Crossovers with an adjustable range of 50Hz -750Hz, Real-time Internal Sub Harmonic Filters, Staggering Output Power and all with less than .1% THD! All of these features are mounted in Massive Audio signature smooth Raven Black Aluminum “finless” heat sink with four cornered hex bolts that unscrew to reveal mounting tubes.

This allows the installer to either bolt down or stack the amps with that clean look. Top it off with the classy Massive Audio Trademark soft blue centered logo and you will want “To wait until your music comes to a complete stop before exiting your ride!”

  • Power/Protect LED Light
  • Freq. Controller
  • Remote Port
  • Bass Boost Controller
  • Gain Control
  • Line Inut RCA Jacks
  • High Level Input
  • Ground Loop Isolator
  • X-Over Switch
  • World Wide Standard Compliant (RoHS, E8, CEA-2006 & CE)
  • Micro Circuit Topology
  • Class "AB" Design
Weight 9 Pounds
RMS Power 455w x 1
PEAK Power 1000w x 1
RMS @ 2 Ohms 455w x 1
Bridged RMS n/a
Min Impedance 2 Ohm Mono
Min Ohm Bridged n/a
THD <0.1%
S/N >90dB
Max Voltage 15v
Max RCA Voltage 5v
Freq. Responce 20Hz - 30kHz
Dimensions 11.8 (in) x 1.9 (in) x 7.8 (in)
Gain Remote Optional (VBR Remote)
5.00 out of 5

1 review for V 1000.1 – Mono

  1. 5 out of 5

    Rating by on :

    I would recommend this amp to anyone. I have two memphis m3 8s on this amp in a single cab s10 ported box. It is great! Beats my truck to death!!! A lot better then my quatum 3000.1 mono amp I had on ‘em. lol

Add Review

Add a review

*

captcha *